That’s OK whether you choose to repair your bike yourself or take it to your preferred local bike mechanic.
The satisfaction of performing your own bike maintenance is obvious. You feel independent, certain that you can solve issues and you can cut costs and time. However, maintenance can become a little trickier and start to require specialized tools above a certain point.
Motorbikes require routine maintenance. Daily maintenance includes checking the tire pressure and lubricating the chain if required. Additionally, keeping the bike clean will help you check that every component is in good working order and prevent rust. It’s crucial to look for any signs of worn-out bearings, damaged seals, and other wear-and-tear.
The first step is to fully understand the owner’s guide for your bike, which contains the fundamentals of how you should maintain your motorcycle.
The list below is meant to recommend which repairs can most likely be completed at home and which should probably be left to experts.
Services that you may perform on your own at home:
1. Change oil filter
You must replace the oil after a certain number of miles in order to maintain your engine functioning correctly; see the owner’s guide to determine how frequently. You should first ride the motorcycle for around five minutes to get it warmed up.
Remove the oil fill and drain plugs when the engine is off, and the bike is upright to allow the oil to flow into a drain pan. Remove the oil filter as well. Insert a new oil filter once the oil has been drained, then refill the engine with the right kind and quantity of motorcycle oil, as directed in the owner’s handbook, using a funnel. Put the oil fill lid back on.
2. Change Air Filter
The performance of your motorbike will suffer if the air filter, which keeps particles out of the engine, is blocked and unclean. Although the petrol tank and other components may need to be removed, the air filter is occasionally readily accessible. Remove and replace the air filter after reaching the air box. Then put back whatever you took out.
3. Check Tire Pressure
Identify the valve stem in the interior of the wheel, take off the cover and place an air pressure gauge into the stem to check the tire’s pressure. Compare the current pressure to what it should be. Utilize a compressor for air. If you over-inflate, let some air out. When finished, switch the valve stem cap.
4. Change Coolant
When it’s time to change the coolant, which keeps your engine from overheating, freezing, or corroding, remove any required bodywork to make way for the coolant drain bolt. Then, set a drain pan underneath the engine and take out the bolt. Take off the radiator cap to ensure that everything drains. Replace the drain bolt when the procedure is finished. Fill the cooling system with the right amount of coolant using a funnel. Put the radiator cover back on and replace any removed bodywork.
5. Clean the chain
Compared to the older, unsealed chains, new chains need less cleaning. Put the gearbox in neutral and raise the motorcycle’s back wheel for simple chain movement. Use a soft bristle brush to remove grit and filth from the chain. Rotate the back wheel while using specially designed chain lubricant to lubricate the chain. Allow the chain to rest for five minutes, then use a paper towel to remove any extra lube.
Even though anyone can learn how to perform these repairs themselves, leaving them to a mechanic may be simpler, especially since they may call for more expensive, specialized tools and expertise. Like to evaluate the state of the tire’s tread, check the tire’s wear indicator and a little rubber knob located in the grooves of the tire. It’s time for a tire change, which a qualified mechanic should handle if the knob is precisely at the same level as the rubber contacts the road.
A professional can be hired to tune and maintain your bike appropriately. They are equipped with the expertise and skills needed to identify and resolve any problems. A professional can also do it for you if you lack the time or patience to do it yourself. As opposed to doing it yourself, it could be more expensive. Ultimately, your expertise, budget, and time constraints will determine whether you should choose self-service or professional assistance. It’s preferable to employ a professional if you’re unsure of your skills or don’t have the appropriate equipment.
It’s simple to undervalue the importance of getting your bike serviced at a reputable workshop like Apna Mechanic. Any type of bike you ride needs routine maintenance to keep it operating safely and smoothly. Apna Mechanic Bike Repair Shop offers a one-stop service facility for all your bike’s needs, regardless of the model of the motorcycle.
Visit our website for additional details on our comprehensive service packages, estimates, and the service department at the Apna Mechanic website. You are also welcome to acquire a free estimate from our customer service, talk about potential upgrades and accessories or ask for our advice on routine maintenance you may perform to increase the lifespan of your motorcycle. Visit our Apna Mechanic website if you want to be the first to learn about sales and maintenance discounts.
