Bikes have become a much-needed part of our lives. They provide us with a practical way to quickly move around a place. Although they might be prone to malfunctions, giving you an unpleasant experience. There are both simple and complex problems that can lead to the breakdown of a bike. Find some of the reasons that cause malfunctions to the bike:
- Inadequate Maintenance: If you do not maintain your motorcycle with consistency, then its bike will malfunction. Should you want to keep your bike in proper condition, it would involve routine service. Regular maintenance prevents serious problems within your bike, like your engine getting stuck due to a low level of engine oil, having a blocked air filter, or a non-working spark plug.
- Damaged Fuel Pipe: A crack or tear in the fuel pipe might also be the reason for malfunctions in the bike. It will create leakage in the fuel system that will reduce the performance of the engine and eventually result in break down. This specific issue can easily be prevented by conducting regular inspection of the fuel pipes.
- Monsoon Problems: Motorcycles, if parked in open during monsoons, can suffer a great deal! Water leaks into the fuel tank can make starting of the bike a difficult task. Therefore, it’s best to park the bike under some shed and have gas in the tank to keep the water out.
- Dead Battery: Dead battery is one of the most common reasons for the breakdown of bikes. It may happen due to the reason of forgot to turn off headlights or you have used the battery much. Avoid forgetting the headlight and limit its usage along with accessories. Also, you must check the level of the battery regularly and replace accordingly.
- Broken Clutch Belt: A broken clutch belt is one of the major reasons behind scooter breakdown. The rider’s scooter suddenly loses power, and controlling it becomes even more challenging for that rider, who undergoes this incident in his scooter. If you check your clutch belts regularly, you can prevent this type of breakdown problem in your scooter.
- Component Failures: Motorbike breakdowns can result in component failures such as a broken timing chain or malfunctioning CDI unit. Through regular care, maintenance looks out for such problems before they can become great issues.
Some Other Important Causes
- Tyers: Tyres need to be checked periodically. However, in most cases, nothing can be done. Examples of a good tyre getting fully inflated by a small stray nail or even by a large pothole while traveling abound.However, there are opportunities for mishaps to take place if it is not maintained regularly. But there are chances of the mishaps occurring if it is not maintained regularly.
- Regular Cleaning: Keep your bike clean regularly. This would save you from spoiling your bike polish. But ensure that you cover the H.T. coil, silencer and ignition switch completely before cleaning it. Put it under a shed and let it dry out completely.
- Pure Air Filter: Often, the air filter of a bike clogs due to very dusty and contaminated air. It is a must that you replace your bike’s air filter sometimes. It would really boost up its performance.
- Check your motor oil: The engine oil is what enables your bicycle to run in its best form. Over time, it is essential to carry out a routine checkup and see if there is an oil leak. Carbon makes the oil thick and creates inner engine friction. Remember, therefore to check if it is checked and replaced to avoid an unnecessary breakdown of your motor bike.
- Plan regular bike maintenance: Servicing or maintaining a bike cannot happen entirely on a personal level. To make sure that your bike is always at its best, it would be beneficial to have a thorough bike service in addition to your regular bike service.
Servicing/maintenance along with proper use of your Bike can take away major breakdowns. Here at ApnaMechanic, we feel that your Bike should be always top. Therefore, we have a service/ maintenance for your Bike so that your vehicle keeps running without any troubles.
